Home

HOT SHOWER FREE FROM YOUR 4WD - CAR WHEREVER YOU CHOOSE TO TRAVEL

Products
Uses
Instructions
Burnt but not buggered
Burnt but not buggered
Contact

SHURFLO KIT (DELUXE)

FLOJET KIT (STANDARD)

HEAT EXCHANGER KIT

SPECIAL BRACKETS

PUMPS - SHURFLO & FLOJET

 

SHURFLO KIT (DELUXE)

This is the most popular kit in our range, as the USA made pump is able to lift water from a source 4 metres lower than where the pump is mounted and deliver a piping hot shower at 7 litres per minute which makes it ideal for placing the hose in the river or creek and having that long hot shower that everyone dreams of in the bush.

Water can also be drawn from a bucket or 20lt plastic drum.

* Quick to set up * Controllable hot-warm-cold * 2WD family cars can be fitted * Great for people with caravans - no need to go into caravan parks * Wash your horse - wash your dog

back to top of page

FULL KIT CONTAINS Copper heat exchanger - brackets - 12 volt Shurflo self priming pressure pump ( can run dry without damage) shower rose with flow control, 2 metres of hose, chromed brass elbow, bracket, switch - waterproof fuse, stainless steel hose clamps, inlet/outlet assembly, fitting instructions and warranty.

You just simply add water and enjoy a hot shower.

FLOJET KIT (STANDARD)

This is the easy to fit no fuss pump, which is a smaller version of the bigger SHURFLO pump - with all the same features like self priming, pressure cut off switch, can be run dry without being damaged, and only weighs 0.6 kilograms which means it can be cable tied into place or just placed in an easy location on or near the battery. All you need to do is push the water supply hoses onto the pumps 1/2" barbed fitting and connect the pump red and black leads to the battery + & - terminal. The water source must be close by the vehicle either from a bucket or plastic drum and will deliver a generous 4 L.P.M. supply of hot water anywhere in the bush.

WASH YOUR HORSE - WASH YOUR DOG - DO YOUR WASHING UP.

back to top of page

FULL KIT CONTAINS: Copper heat exchanger, brackets, 12 volt Flojet self priming pump (can run dry without damage), shower rose with flow control, 2mt shower hose, chrome brass elbow, bracket, switch, waterproof fuse, stainless steel hose clamps, inlet/outlet assembly, fitting instructions.

ALL YOU NEED FOR A PERFECT SHOWER IN THE BUSH.

HEAT EXCHANGER KIT

Made from 100% copper - this is the heat exchanger that the professional tour operators use, because of its attention to engineering, manufacturing and material selection has allowed TWINE 4WD & CAR HOT WATER SHOWER SYSTEM to be used for many years by thousands of satisfied customers in the rugged outback of Australia - one of the harshest environments on the planet - ideal for boats.

FULL KIT CONTAINS Copper heat exchanger - bracket system - stainless steel hose clamps.

back to top of page

 

SPECIAL BRACKETS

'Professionally' we make it easy with a range of special brackets for the heat exchanger and special mounting plates for the pump. We also provide pictorial installation guide sheets for the more popular models. Fitting could not be easier.

back to top of page

 

PUMPS

SHURFLO PUMP
FLOJET PUMP
LIFT
4 METRES
1 METRE
LITRES PER MINUTE (through shower rose)
7 LPM
4 LPM
PRESSURE
45 PSI
35 PSI
WEIGHT
1.5kg
0.6kg (can be mounted with cable ties)
RUN DRY OK
YES
YES
SELF PRIMING
YES
YES
INLET/OUTLET PORTS
1/2 inch
1/2 inch
PRESSURE SWITCH
YES
YES

back to top of page

 

HOME
PRODUCT RANGE
USES
FITTING INSTRUCTIONS
PRICE LIST
CONTACT
BURNT BUT NOT BUGGERED
Mail Address: PO Box 69 Dyers Crossing NSW 2429
PHONE: 02 6550 2111
FAX: 02 6550 2122
E-MAIL:info@twine4wdshowers.com.au

 



Hosted and managed by Bestplace Online Pty Ltd